Mountain Off Road BLTJ97 - Manual

Quantity: Description: Size: Location:
11 Puck-Aluminum 2-1/4” x 1”
1/2” hole
All
1 Bolt 7/l6” x 4” 1
4 Bolt 7/l6” x 3-1/2” 5,6
6 Bolt l/2” x 4-1/2” 2,3,4
2 Bolt 1/4” x 3/4” T-Case Shifter
5 Washer-Flat 7/16” 1,5,6
6 Washer-Flat 1/2” 2,3,4,
1 Washer-Fender 1/4” Fan Shroud
6 Nut 1/4” CrimpLoc Fan Shroud
1 Drop Plate #BLTJ97-01 T-Case Shifter Linkage
2 Grille Support KJ04510 Grille to Frame
1 St. Guide Lift Bracket #BLTJ97PBB Steering Guide
MOUNTAIN OFF ROAD ENTERPRISES,
LLC.
P.O. BOX 690, DELTA, COLORADO 81416
970-625-0500
970-625-3747
Fax
E-mail: [email protected]
www.mountainoffroad.com
INSTRUCTIONS for M.O.R.E.
™
BLTJ97 1” BODY LIFT KIT / SYSTEM
This M.O.R.E.™ One Inch Body Lift Kit fits 1997-2000 Jeep®
TJ® Wrangler® vehicles with ether 2.5L or 4.0L engines,
with manual or automatic transmissions, with or without air
conditioning. This kit has been designed to fit on TJ Wran-
gler’s that are stock (no suspension lift), or Wrangler’s that
have been lifted with aftermarket suspension lift kits up to 4”.
M.O.R.E.™ has up-dated this kit from the earlier kits with the
necessary hardware to address the following items: Steering
Shaft Guide Bracket, Grille Support Blocks, and Transfer
Case (T-Case) Shifter Drop Plate. Please read all instruc-
tions and our Terms and Policies on page 3 before you begin
installing this kit. Familiarize yourself with all components in
this kit and the parts of your Jeep that you will be working on.
Common hand tools are required and some knowledge of
mechanical things are needed. This kit contains the following
items:
Page 1 of 4