Lukas P 660 SG - Manual (Page 6)

6
In addition to the safety instructions of these operating instructions, all generally applicable,
statutory and otherwise binding national and international rules for accident prevention need
to be heeded and disseminated!
WA R N I N G / C A U T I O N / AT T E N T I O N !
The device is speci¿ ed exclusively for the purpose represented in the operating
instructions (see Chapter "Proper use"). Any use that differs or goes beyond this is
considered improper. The manufacturer/supplier shall not be held liable for damages
resulting from improper use. The risk shall be borne solely by the user.
Proper use also includes heeding the operating instructions and complying with the inspection
and maintenance requirements.
Never work in a fatigued or intoxicated state!
In order to prevent ¿ re hazard,
ensure suf¿ cient ventilation
when operating combustion
engines and maintain a safety
distance of at least 1 m (39.4
in.) to walls and other shields. Damage to electrical
components may only be
eliminated by a trained quali¿ ed
electrician, in compliance with
all applicable national and
international safety guidelines
and regulations.
Ensure that the combustion
engine motor pumps always
sit on a largely level horizontal
surface, so that no fuel can
leak. When the units are installed,
care needs to be taken that they
are not impaired by extremely
strong temperature effects.
The device is ¿ lled with
hydraulic À uid. These hydraulic
À uids can be detrimental to
health if they are swallowed or
the vapors thereof are inhaled.
Direct contact with the skin
should be avoided for the same
reasons. Also, when handling
hydraulic À uids, note that they
can negatively affect biological
systems. When operating and/or storing
the device, make sure that the
function and the safety of the
device are not impaired by
strong external temperature
effects or that the device is
damaged. Consider that the
device can also heat up when it
is continuously used.
Make sure there is adequate
lighting while working. Before transporting the device,
always check to see that the
accessories are positioned
securely against the possibility
of an accident.
Always keep these operating
instructions easily accessible
at the site where the device is
used. Make sure you properly dispose
of all removed parts, leftover
hydraulic À uid, leftover oil and
packing materials.