Lukas P 660 SG - Manual (Page 5)

5
Heed all safety instructions
and hazard warnings on the
device and in the operating
instructions. All safety instructions and
hazard warnings on the device
are to be kept intact and in a
legible condition.
Make sure that all safety covers
are present on the device and
in proper working condition. Any work procedure that
detracts from the safety and/or
stability of the device should be
abandoned!
Safety equipment must never
be disabled! The maximum permissible
operating pressure must not be
changed.
Before switching on/engaging
the device or while operating
the device, it must be ensured
that no one is endangered by
operating the device. Observe all intervals that
are prescribed or speci¿ ed
in the operating instructions
for recurring tests and/or
inspections.
When working in the vicinity
of live components and lines,
take appropriate measures for
preventing current transfers or
high voltage À ashovers to the
device. For repairs only original LUKAS
accessories and replacement
parts are to be used.
Make sure that you do not
get caught in the hose loops
and trip when working with or
transporting the device.
The source of electrostatic
discharge with the possible
consequence of spark formation
when handling the device
should be prevented. Do not come in contact with
the motor and exhaust system
because of the risk of burns.
Motor pumps must not be
operated in areas at risk for
explosion! Combustion engines must not
be operated in closed rooms
due to risk of poisoning and/or
suffocation.
If fuel is spilled on combustion
engines, it must be completely
removed before starting the
motor. Refuelling during operation of
a combustion engine is strictly
prohibited!
Keep combustion engines and
their fuel away from ignition
sources due to danger of
explosion. All damaged electrical
components (e.g. smouldered
cables etc.) must be promptly
replaced!