Lukas P 630 SG - Manual (Page 13)

13
5.3 Motor
WARNING/CAUTION!
See also the separate operating instructions of each engine manufacturer
accompanying the delivery.
5.3.1 Petrol engine
These hydraulic units are equipped with a combustion engine driven by the fuel "petrol".
The power units are equipped with a cable-pull starter with which the engine is started.
(For specifi c details, please consult the separate operating instructions of the engine
manufacturer!)
NOTE:
The engine installed in the LUKAS power units does not match every detail of
the engine described in the manufacturer's separate operating instructions.
Nevertheless, it is important that you follow all safety rules and operating,
maintenance and storage instructions in the separate engine instructions as
absolute since they are not affected by adjustments made by LUKAS.
HONDA motors have a main switch that must be activated to switch the power unit on and
off. The speed adjusting lever on these power units has two switch positions.
Switch position 1 (standard): Speed 3000 1/min " " and
Switch position 2: Speed 3800 1/min " ".
The setting is adjusted by moving the speed adjusting lever.