Brother NC-2200W - Manual (Page 28)

NC-2200W WIRELESS SETTING 2 - 17
NC9100h_FM6.0
8 A list of the found Wireless Networks will be displayed. Select
the Access Point/Base Station you wish to associate the NC-
2200w with and click Next.
9 If your network is not configured for Authentication and
Encryption, the screen shown will appear. To continue
installation, click OK.
Go to Step 10.
■ The NC-2200w supports the Automatic Private IP Addressing
(APIPA) protocol. If a DHCP/BOOTP/RARP server is
unavailable, the NC-2200w will automatically assign an IP
address from the range 169.254.1.0 to 169.254.254.255.
■ We recommend that you contact your network administrator if
you are unsure about the correct IP address settings.
■ If the Access Point/Base Station doesn’t appear on the list, you
can manually add it by clicking Add. Follow the on screen
instructions for entering the SSID/ESSID and Channel number.
■ The SSID/ESSID name “SETUP” may be displayed on the list
more than one time. You can select any “SETUP” from the list.