Brother NC-2200W - Manual (Page 27)

2 - 16 NC-2200W WIRELESS SETTING
NC9100h_FM6.0
6 The search will display a list of found Brother Wireless Devices.
Select the device you wish to configure and click Next.
7 If your network supports DHCP/BOOTP/RARP, choose Obtain
an IP address automatically and the NC-2200w will
automatically obtain IP address information from your network.
If you want to manually enter the IP address settings of the NC-
2200w, choose Set static IP address and enter the necessary
IP address settings for your network.
After making your selection, click Next and the Wizard will
search for available wireless networks.
The Default Node name of the NC-2200w is " BRN_xxxxxx "
(where " xxxxxx " is the last six digits of Ethernet address.)