Connecting the monitor to your computer 7, Connecting the monitor to your computer – Apple Multiple Scan 17 Display User Manual
Page 13
Connecting the monitor to your computer
Follow these steps to connect the Apple Multiple Scan 17 Display to your
computer:
IMPORTANT
Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
1
Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
WARNING
This equipment is intended to be electrically grounded.
Your monitor may be equipped with a three-wire grounding plug—a
plug that has a third (grounding) pin. This plug will fit only a
grounded AC outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact a licensed electrician to replace
the outlet with a properly grounded outlet. Do not defeat the purpose
of the grounding plug!
7
Setting Up