Apple Final Cut Server 1.5 - Manual (Page 88)

88 Chapter 6 Using Device Setup Assistant
AFP and SMB/CIFS devices have the following settings:
Device Name: Â Enter a name for the device.
Network Protocol: Â Choose the type of network connection required for this device. In
this case, choose either AFP or SMB/CIFS to match your network connection.
File Server:
 Enter the host name of the server.
Path: Â Enter the path of the server to use as the root path.
User Name: Â Enter your user name in this field to log in automatically to the server on
every attempted server access, such as searching and copying.
Password:
 Enter the password that goes with the above User Name entry. Leave this
field blank if the User Name field is blank.
Workgroup:
 SMB/CIFS devices have this additional setting. Enter the name of
the workgroup.
The Workgroup field
appears when you
choose the SMB/CIFS
network protocol.