Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 66)

63
1
2
3
4
5
6
7
8
9
10
section
Using the Switch from a Remote Console
OSD-Menu Keyboard Commands
Command Function
èê Navigate to different servers in the same BANK
Page Up/Page Down Select next or previous BANK
Insert Highlight server name for editing
Enter Switch servers
Tab Open the Function/Help page
Esc Exit the OSD
To switch servers using the main OSD menu, use the arrow keys on your
keyboard to navigate to the desired server and press the “ENTER” key.
A “
!
” symbol indicates which server is currently being accessed on
your console.
To change the name of a server, use the arrow keys to navigate to the desired
server, press the “Insert” key, type in the new name, and press “ENTER” to save
the entry. You may use up to 15 characters for each server name.
Function/Help Page
The Function/Help page allows you to set the time intervals for the AutoScan
feature and OSD display time, enable the password security feature, and program
hot keys.