Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 62)

59
1
2
3
4
5
6
7
8
9
10
section
Using the Switch from a Local Console
With a daisy-chain switch configuration, you can switch between BANKs (KVM
switches) by pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the
previous BANK. Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to switch to
the next BANK.
P a g e
D o w n
P a g e
U p
With a daisy-chain switch configuration, you can switch directly to any port on
any BANK by pressing “Scroll Lock”, “Scroll Lock”, BANK address, and the
port number. For example, if you press “Scroll Lock”, “Scroll Lock”, “03”, “05”,
the server on BANK 03, port 5 will become active.
Note: You will have approximately five seconds to complete each
hot-key sequence.
See page 65 for instructions on how to change the hot-key-initiator key.