Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 57)

54
Using the Switch from a Remote Console
Performance Settings (Bandwidth)
You can adjust the bandwidth settings on the Switch to give you the desired
compression and color-support levels for your remote sessions.
To change the bandwidth settings:
1. In the drop-down bar, click on . Select Performance. The performance
settings box will appear (see Fig. 19).
Fig. 19 Performance-Settings Box
2. Select one of the following bandwidth options:
• Adaptive—Automatically adapts to the best compression and colors
based on activity.
• Low—Provides high compression and 16-color support.
• Medium—Provides medium compression and 256-color support.
Medium is recommended when accessing the Switch over an
Internet connection.
• High—Provides low compression and high, 16-bit color support. This
setting provides optimal performance when working on a LAN.
• Custom—Allows you to select your own compression and
color-support levels. Choose between Low, Medium, and High
compression, and 16-, 256-, and High (16-bit) color support.
3. When finished, click “OK” to save the setting. The screen of the last
accessed target server will appear.