Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 32)

29
1
2
3
4
5
6
7
8
9
10
section
Remote Installation
Step 2 Logging into the Web Interface
1. Open your web browser. If you are using Windows Vista, you must
run Internet Explorer in administrator mode. In order to run Internet
Explorer in administrator mode, right-click on Internet Explorer and
select “Run as Administrator”. If you are using Internet Explorer
8.0, click the “Compatibility View” icon next to the address bar.
2. Type in the IP Device’s IP address in the address field, using this
format: https://192.168.2.155/. The login page will appear (see
Fig. 1). Bookmark the page for easy reference.
Note: HTTPS is used for communication over an encrypted secure
socket layer (SSL) mechanism.
Click on the arrow next to “Remote Access” to toggle between the
Configuration and Access screens.
Fig. 1 Login Page
3. Type in the following default user name and password (case-sensitive):
User Password
admin SMBremote
4. Click . The web interface will open at the Network-Configuration