Remote installation, Step 5 switch configuration – Belkin Omniview SMB KVM-over-IP Switch F1DP108G User Manual

Page 39

Text mode
Original mode

Remote Installation

Step 5 Switch Configuration

The Switch-Configuration page allows you to specify the KVM Switches
daisy-chained to the SMB KVM-over-IP Switch, and to name all connected
servers. To open the page, click “Switch Configuration” under “Administration” in
the far-left column (see Fig. 4).

Fig. 4 Switch-Configuration Page

Note: By default, the Switch-Configuration page assumes that all daisy-chained

KVM Switches have 16 server ports. The page shows 256 available server-name

fields, which is the maximum number of servers supported by one daisy-chain

configuration (one SMB KVM-over-IP Switch daisy-chained with 15 additional

KVM Switches).