Apple Xserve Diagnostics - Manual (Page 37)

Appendix AXD Tools Test Reference 37
Power Supply Tests
Sensor Tests
USB Tests
Connect USB devices before running USB tests.
Video Controller Tests
To run these tests, a display must be attached to any graphics cards being tested. The
displays can’t be asleep. For example, if you have two graphics cards, they both need
displays attached and both displays must not be asleep.
Test Estimated completion time Description
Good Bit 1 second Checks if the power supply’s good bit
is set. If it’s not set, this could indicate
that the power supply isn’t seated
well, is bad, or that there’s no AC
connected.
Quick 5 seconds This is available only if you have more
than one power supply. This turns off
the redundant power supplies so that
only one is run on.
Test Estimated completion time Description
Sensor Reads 1 second Verifies that the sensor reads are
within the preset sensor limits
Test Estimated completion time Description
Presence 1 second Verifies that a USB device is connected
Test Estimated completion time Description
OpenGL Point 10 seconds Verifies video controller using a 2D
point test
OpenGL Line 10 seconds Verifies video controller using a 2D
line test
OpenGL Triangle 10 seconds Verifies video controller using a 2D
triangle test
OpenGL Quad 10 seconds Verifies video controller using a 2D
quadrilateral test
OpenGL Quad with Texture 10 seconds Verifies video controller using a 2D
textured quadrilateral test
OpenGL Rectangle 10 seconds Verifies video controller using a 2D
rectangle test
OpenGL Cube 10 seconds Verifies video controller using a 3D
cube test