Apple QuickTake 100 - Manual (Page 57)

m Set Camera Name Brings up a box that lets you give a unique name to your
camera. This is especially helpful if more than one camera may transfer
pictures to a particular Macintosh.
m Set Camera Date & Time Brings up a box that tells you whether the clock
needs to be reset to match your Macintosh. If it does, click OK.
m Camera Controls Brings up a control panel like the one on the camera.
The Windows menu
The Windows menu lists the names of all the QuickTake windows currently
open. You can choose which window should be frontmost. (If you haven’t
saved and named their contents, image windows are identified as Image 1,
Image 2, and so on.)
50 Chapter 4
The name you type can
contain up to 31 characters.
When you’re ready, click Set.
To change the resolution, click here.
To turn on (or turn off) the timer, click here.
To change the flash
To erase the
pictures in the
camera, click here.
To take a picture, click here.