Apple QuickTake 100 - Manual (Page 12)

Installing the batteries
Use the three NiCad batteries that came with your camera. If the NiCad
batteries are being charged, you can substitute three AA non-rechargeable
batteries in the camera.
1 Flip open the door to the battery compartment.
2 Insert the batteries into the camera.
3 Close the battery compartment door.
See also: Appendix B, “Battery Information.”
Position the – and + ends of each
battery as indicated on the door.
Arrange the ribbon under the batteries so you can use
it to pull them out when you need to replace them.
WARNING Do not mix different types of batteries in the camera. Use
only three NiCad batteries or three AA non-rechargeable batteries.
Mixing batteries may cause a fire or a small explosion.
5 Getting Started With the QuickTake 100 Camera