Apple QuickTake 100 - Manual (Page 13)

Installing the QuickTake software
Before you can transfer images from your camera to your Macintosh
computer, you need to install the necessary software on your Macintosh.
You’ll need the QuickTake disks that came with your camera. The disks
contain
m the Installer, a program that installs everything you need
m QuickTake 1.0, a program that transfers pictures from the camera to your
Macintosh
m other files needed by the QuickTake 100 camera
IMPORTANT If you have system software version 7.0.1• on your Macintosh, you
must turn on AppleTalk before you install QuickTake software. Open the
Chooser and make sure that AppleTalk is active.
1 Insert the appropriate installation disk into a floppy disk drive.
The choice depends on whether you have a Power Macintosh or not.
m If you have a Power Macintosh, insert QuickTake for Power Macintosh.
m Otherwise, insert QuickTake Install Disk 1.
If necessary, open the disk icon.
2 Double-click the Installer icon to open it.
3 In the Welcome dialog box that appears, click OK.
6 Chapter 1
Use the Installer to install
the QuickTake software.
For important late-breaking
information, open the Read Me.