Apple QuickTake 100 - Manual (Page 45)

Erasing pictures from the camera
After you transfer your pictures to your Macintosh, you should erase them
from the camera to make room for new pictures.
If the camera is connected to your Macintosh, there’s another way to erase
pictures. You can open the QuickTake program and choose Camera Controls
from the Camera menu. Then click the Erase All button on the Macintosh
screen.
WARNING This erases all of the pictures in the camera. You cannot
erase a few and leave the rest in the camera.
To erase all the pictures in the camera,
lightly press the Erase All button.
(Use any small, pointed object.)
As the pictures are erased, the Trash icon in the
control panel display blinks. In a few seconds,
the display shows 0 (zero) pictures taken.
38 Chapter 3