Apple Xserve (Original) - Manual (Page 65)

Installing or Replacing Server Components 65
5 Locate the PCI/AGP slot at the back right side of the server.
6 Prepare the card slot by doing one of the following:
m If a card is already in the slot, remove it by grasping the edges and gently pulling it toward
the left side of the enclosure.
Store the card in static-proof packaging made to protect it.
m If no card is in the slot, be sure to remove the slot cover (which came loose when you
loosened the cover’s thumbscrew on the back panel).
PCI/AGP combo card slot
Pull the PCI/AGP card to the side to
disengage it from the connector, and
then pull it up and out of the server.