Apple Power Macintosh 5260 Series - Manual (Page 54)

52 Chapter 5
Inserting a CD-ROM disc
Follow these instructions to insert a CD-ROM disc into your CD-ROM drive.
Then follow the instructions provided with your disc, as well as the
instructions in this manual.
1 Start up your Macintosh computer, if it’s not already on.
2 Press the Open/Close button to open the tray of the CD-ROM drive.
The tray opens.
3 Place a CD-ROM disc in the tray, with the disc label facing up.
Make sure the disc is lying flat and centered in the tray.
Open/Close button
WARNING It’s best not to use small (8 cm) discs with your computer.
Because your computer is designed to tilt and swivel on its base
(allowing you to position the monitor to minimize glare and reflections),
small discs may not stay in the proper position in the CD-ROM drive. If
you do use a small disc, make sure your computer is as level as possible
before you insert the disc, and don’t tilt and swivel the base while a
small disc is in the drive. If a small disc is not properly seated, the disc
or the CD-ROM drive (or both) may be damaged.