Apple Power Macintosh 5260 Series - Manual (Page 110)

3 When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup icon.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Choose Update Driver from the Functions menu.
7 When the update process is finished, quit Drive Setup.
8 Shut down your computer.
9 Start up your computer from the CD-ROM disc that contains system software or from the
Install Me First disk.
See “Starting Up From a CD-ROM Disc” or “Starting Up From a Floppy
Disk” in the section “Initializing a Hard Disk” earlier in this chapter.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click Continue.
The Easy Install dialog box appears.
108 Chapter 6
Disk on which
system software
will be installed
DO NOT click the
Install button if you
want a clean installation.
If you need to install on a different
disk, you click this button.