Apple Macintosh Arabic Language Kit - Manual (Page 10)

A-7
NOIR/PANTONE 7 7
2. Insert the Install 1, English disk into your floppy drive
(or insert the Macintosh Arabic Language Kit CD disc
into your CD-ROM drive).
You should see the Installer icon in the Install 1, English
disk’s window.
3. Open the Installer by double-clicking its icon.
A welcome screen appears.
4. Click Continue.
The Install dialog box appears.
5. Press the pop-up menu at the upper-left corner of the
dialog box and choose Custom Remove.
6. Make sure that the disk named is the disk from which
you want to remove your Arabic or Persian language
software.If the wrong disk name appears, click Switch
Disk until you see the name of the correct disk.
If the wrong disk name appears, click Switch Disk until you
see the name of the correct disk.
7. Click to select the items you want to remove.
8. Click Remove.
There is a short wait while the files are removed.
9. If you see a message telling you to restart your
computer, click Restart.
Arabic is not removed until you restart your computer.
v Note: If your language kit was installed on a disk different
from your startup disk, you will only be asked to quit the
Installer application. v
Chapter 2: Setting Up
Click here to remove
the selected files.
Press this pop-up menu and
choose Custom Remove.
Make sure this is the name
of the disk where the
language kit is installed.
Click here to
switch to a
different disk.
Click the checkbox of the
items you want to remove.