Apple Power Macintosh (7100 Series) - Manual (Page 55)

Connecting video equipment for output from the computer
You can deliver and record a sophisticated presentation by combining the
video and sound capabilities of your Macintosh. The steps that follow explain
how to set up equipment for recording the computer’s output on videotape
and adding voice annotation with a microphone.
To ensure that your presentation is recorded on videotape and shown on the
television, you must connect the VCR to the computer and the television to
the VCR.
Before you start:
m Make sure that the VCR has a cable with either a composite (RCA plug)
connector or an S-video connector.
If the VCR has an RCA plug, make sure you have the adapter for
composite video marked with the Æ icon.
m Place the VCR and television near the Macintosh.
m Shut down the Macintosh and turn off the VCR and television.
45 Connecting Additional Equipment