Apple Power Macintosh (7100 Series) - Manual (Page 105)

95 Troubleshooting
8 Insert the Install Disk 1 disk into the floppy disk drive, or insert the CD-ROM disc that
contains system software into the CD-ROM drive.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
9 Click Continue.
The Easy Install dialog box appears.
10 Make sure that the hard disk named in the Destination Disk box is the one on which you
want to install system software.
If it isn’t, click Switch Disk until the correct disk name appears.
11 Hold down Shift– x –K to start the clean installation.
The following dialog box appears.
12 Click the Install New System Folder button and click OK.
The Easy Install dialog box appears. The Install button has changed to Clean
Install, and the contents of your old System Folder have been moved to a new
folder named Previous System Folder.
Disk on which
system software
will be installed
For a clean installation,
DO NOT click the
Install button.
If you need to install on a
different disk, click this button.