Apple Newton Internet Enabler User Manual

Page 9

In the third setup slip, enter the login script (provided by your ISP) and the

timeout delay:

See the next section for instructions on setting up a login script.

Note:

If your ISP uses PAP or CHAP (password authentication), you probably won’t

need a login script—the “Done” command will be the only item in the script.

Tap Done to select commands for the login script

provided by your ISP. (The next section shows the list

of commands and gives instructions for entering the

login script.)

Tap here to set a

timeout value. (This

value is used at login

time—if any step in

the login script takes

longer than the

timeout value, the

login operation will

be canceled.)

Tap here when you’re through filling out this slip and

entering the login script.

Tap Go Back if you need to

return to the previous slip.