Apple Newton Internet Enabler User Manual
Page 8

6
In the second setup slip, enter the following information (provided by your ISP):
“Static” means that your ISP has given your device or the gateway permanent
addresses. “Dynamic” means that the Internet host will determine the address of
your device or the gateway at the time you log in.
Note:
If you don’t know whether the addresses you received from your ISP are
dynamic or static, specify Dynamic but fill in the address fields. Some ISPs may
require you to specify Dynamic and enter values other than zeroes in the
address fields.
8
Tap here to continue
on to the next slip.
Tap here if you need to
view the previous slip.
Enter the domain name assigned by your
ISP. Usually you can use the default
domain name (“.”).
Enter the address for
the name server
(DNS), provided by
your ISP.
If “Static” is selected, you must fill in the addresses
provided by your ISP (you can write over the 0’s or
use the onscreen keyboard; use the Tab key to move
from one field to the next). If “Dynamic” is selected,
you can leave the address set to 0’s.
Tap here, and in the
list that appears, tap
Static or Dynamic, as
specified by your ISP.