Apple Newton Internet Enabler - Manual (Page 15)

Storing Internet setups on a PC card
If you have a storage card in your Newton device, you can store your Internet setups
on the card. Follow these steps:
1 Open the Internet Setup application.
2 Tap the Information button ;, and in the list that appears, tap Prefs.
3 In the Internet Setup Preferences slip, make sure the box labeled “Always store new
setups internally” is unchecked (tap it, if necessary, to remove the checkmark).
This saves all subsequent Internet setups on the card. This setting overrides the
storage setting in the Card slip (accessed via the Extras Drawer).
To store setups in the internal memory, tap the box to add the checkmark.
Moving an Internet setup to or from a PC card
You can move Internet setups from a PC card to the internal memory and vice versa.
Here’s how:
1 Open the Internet Setup application.
2 In the Internet Setup slip, the rightmost column tells you where each Internet setup
is stored (Card or Internal). To move a setup, tap to check the box next to it.
3 Tap the Folder button ƒ.
15
Make sure this box
is unchecked.