Apple Power Macintosh 9500 Series - Manual (Page 95)

Solving printer problems
m All printers: Check your printer settings in the Chooser, making sure you
have selected the correct printer. Next, turn off the computer and printer
and check the printer cable connections. If neither of these suggestions
solves the problem, reinstall your printer driver (this software probably
came with your printer on a floppy disk).
m Personal LaserWriter LS, LaserWriter Select 300, and Personal LaserWriter
300: The system software installed on your computer includes a new
version (version 1.2) of the Personal LaserWriter 300 printer driver. This
driver works with all three of these printers. Do not install your older
Personal LaserWriter LS or LaserWriter Select 300 drivers; the older
printer drivers are not compatible with Power Macintosh computers.
m StyleWriter and StyleWriter II printers: The system software installed on
your computer includes a new version (version 2.0) of the StyleWriter I/II
printer driver. This driver works with both the StyleWriter II and the
StyleWriter printers. Do not install your older StyleWriter driver; the older
driver is not compatible with Power Macintosh computers.
If your printer is different from the ones just mentioned, its driver may not
be included on the Power Macintosh hard disk. You should install the driver
for your printer if you encounter printing problems. Install the driver from the
disks that came with the printer.
85 Troubleshooting