Apple Workgroup Server 8150/110 - Manual (Page 75)

A “sad Macintosh” icon appeared and the server won’t start up.
Your server cannot start up because of a problem with the system software or
the server hardware.
m Eject any floppy disks (or CD-ROM discs) by turning off the server and then
holding down the mouse button while you turn the server on again. Try starting
up with a different startup disk (such as the Workgroup Server Software
CD-ROM disc). If the “sad Macintosh” icon appears again, consult the
service and support information that came with your server for instructions on
how to contact an Apple-authorized service provider or Apple for assistance.
You see an error message at startup telling you that the system will use the LocalTalk port.
If you will not be using an Ethernet network, you need to change the setting in
the Network control panel from EtherTalk to the appropriate network. See “If
You Need to Switch the Network Connection” in Chapter 2.
The server’s clock keeps time inaccurately.
m Your server has a clock that runs continuously. When the computer is turned
off, a battery keeps the clock running. If your clock begins to keep time
inaccurately, have your Apple-authorized service provider replace the battery.
Solutions to common problems 59