Apple Workgroup Server 8150/110 - Manual (Page 102)

Cleaning your equipment
Follow these general rules when cleaning the outside of your server and
its components:
m Use a damp, soft, lint-free cloth to clean the server’s exterior. Avoid getting
moisture in any openings.
m Don’t use aerosol sprays, solvents, or abrasives.
Cleaning the server case
To clean the case, do the following:
1 Turn off the server and disconnect the power plug. (Pull the plug, not the cord.)
2 Wipe the surfaces lightly with a clean, soft cloth dampened with water.
Cleaning the monitor
To clean the screen, put household glass cleaner on a soft cloth and wipe the
screen. Don’t spray the cleaner directly on the screen, because the liquid might
drip into the monitor or server.
Cleaning the mouse
The mouse contains a small ball that must roll smoothly for the mouse to work
properly. You can keep this ball free of dirt and grease by using the mouse on a
clean, lint-free surface and cleaning it occasionally.
You need a few cotton swabs and a clean, soft, lint-free cloth.
1 Turn off your server.
2 Turn the mouse upside down and turn the plastic ring on the bottom counterclockwise to
disengage it.
86 Appendix A / Safety, Maintenance, and Health Information