Class1 ENFO IV - Manual (Page 2)

Enfo IV (109050) 090303 – 2 – Class 1
The Enfo IV is an engine-monitoring device that reads and displays engine
temperature, engine RPM, and engine oil pressure as it is transmitted from the
engine ECU via the SAE J1939 CAN bus. Vehicle voltage is also displayed but is
independent of CAN operation.
The Enfo IV can be used on both 12 and 24 Volt systems. The Enfo IV uses an
automatic voltage detection system to determine the low voltage point for alarm
activation.
The Enfo IV can be connected to an external alarm and external alarm-silence
switch. High engine temperature (250 ° F), low oil pressure (10 PSI), or low voltage
(11.9V or 23.8V) will cause the Enfo IV to activate the external alarm.
Enfo IV C1 – PN 108661
Colored corner tags
Beige C1 – PN 106669
Black C1 – PN 106030
Blue C1 – PN 106023
Brown C1 – PN 106025
Burgundy C1 – PN 106667
Gray C1 – PN 106668
Green C1 – PN 106022
Lime C1 – PN 106670
Light Blue C1 – PN 106671
Orange C1 – PN 106028
Pink C1 – PN 106024
Purple C1 – PN 106666
Red C1 – PN 106029
Rust C1 – PN 106027
Silver C1 – PN 106026
White C1 – PN 106665
Yellow C1 – PN 106664
10ft Connection harness C1 – PN 110346