AEM 30-3436 Series 2 AEMnet Adapter - Manual (Page 5)

Page 5
3. If the screwdriver does not fit in the area of the plug, a ground paper clip can be used to
release the tabs of the plug as shown in figure 6.
Figure 6: Grind a paper clip like this
INSTALL AEMnet ADAPTER HARNESS
4. Table 2 below lists the corresponding CAN1L and CAN1H pin locations for each Series 2
EMS.
CAN1L (Green wire) CAN1H (White wire)
EMS Adapter p/n LOCATION LOCATION
30-6600 30-3436 42 12
30-6601 30-3436 42 12
30-6620 30-3437 57 40
Table 2: CAN1L and CAN1H pin locations
Figures 7 and 8 below show the connectors for each Series 2 EMS.
Figure 7: Wire-side view of pinout for 6600 and 6601 EMS
Figure 8: Wire-side view of pinout for 6620