Specifications, Warranty – AEM 30-3250 Engine Position Module User Manual
Page 6
Page 6
10-3250 for 30-3250 EPM Puck RevA 022212
SPECIFICATIONS
EPM Puck
Supply Voltage
12V (nominal)
Input Channels
1 x 12V Switched Power During Cranking
1 x Ground
Output Channels
1 x CAM
1 x CRANK
CAM Ouptut
1
Crank Output
24
Sensors
2 X Zero Speed Optical
Operating Voltage (nominal) 8-16 volts dc
Enclosure Size
2.9”Ø x 1.16”Height/1.635”Height with Studs
73.7mmØ x 29.5mm Height/41.5mm Height with Studs
Weight
0.52 lbs / 235.9 grams
WARRANTY
12 Month Limited Warranty
Advanced Engine Management, Inc. warrants to the consumer that all AEM High Performance products will be free from defects in
material and workmanship for a period of twelve (12) months from date of the original purchase. Products that fail within this 12
month warranty period will be repaired or replaced at AEM’s option, when determined by AEM that the product failed due to defects
in material or workmanship.
This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase
price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the
failure of this product.
Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty
applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said
12 month warranty period. Improper use or installation, accident, abuse, unauthorized repairs or alterations voids this warranty.
An AEM Warranty Claim Form Must Accompany All Warranty Claims. Products returned to AEM with no Return Goods
Authorization and or No Warranty Claim Form may be rejected and returned to sender.
AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products
manufactured by AEM. Warranty returns will only be accepted be AEM when accompanied by a valid Return Goods Authorization
(RGA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of
the date RGA was issued.
AEM ELECTRONICS
– ALL –
Please note that before we can issue an RGA, it is first necessary for the installer or end user to contact our AEM
Electronics tech department at (800) 423-0046 or e-mail us at
to discuss the problem. Most
issues can be solved over the phone. Under no circumstances should a system be returned or RGA requested before the
above process transpires.
AN AEM WARRANTY CLAIM FORM MUST ACCOMPANY ALL ELECTRONICS WARRANTY CLAIMS. AEM ELECTRONIC
Products returned to AEM with no RGA and or No Warranty Claim Form may be rejected and returned to sender.
A copy of the AEM Warranty Claim Form can be e-mailed or faxed by contacting (310) 484-2322 or e-mail us at
and ask for Warranty/Claims Department.
Any AEM electronics product can be returned for repair if it is out of the warranty period. There is a minimum charge of $50.00 for
inspection and diagnosis of AEM electronic parts. Parts used in the repair of AEM electronic components will be extra. AEM will
provide an estimate of repairs and receive written or electronic authorization before repairs are made to the product.
Need additional help? Contact the AEM Performance Electronics tech department at
1-800-423-0046 or [email protected], or visit the AEM Performance Electronics
forum a