J.P. Instruments EDM 760 Pilots Guide - Manual (Page 5)

Section 1 - Introduction
Product Features
EDM-760 Standard Instrument:
• Hands-free, automatic scanning
• Bar graph
•
LeanFind  mode
• Battery voltage
• Normalize view
• DIF low to high EGT spread
• Shows largest EGT variance
• Oil temperature option
• EGTs to 1°F resolution
• Shock cooling monitoring
• Outside air temperature (OAT)
option
• User selectable index rate
• Alarm “red line” limits
• Fast response probes
• Real-time serial data port
Fuel Flow Option:
• Solid-state pulse generating rotor
fuel flow transducer
• Fuel quantity measured in gallons,
kilograms, liters, or pounds
• Low fuel quantity alarm
• Low fuel time alarm
• GPS interface
• Instantaneous fuel flow rate,
• Total amount of fuel consumed,
• Total fuel remaining, and
• Time to empty at the current fuel
flow rate.
Long Term Memory:
• Records and stores data every 2 to
500 seconds
• Non-volatile memory
• Post-flight data retrieval
• Data retrieval software
• 17 hours data capacity at 6 second
sample rate
Engine Data Management
The EDM-760 Engine Data Management system is the most advanced
and accurate piston engine monitoring instrument on the market. Using the
latest microprocessor technology, the EDM-760 will monitor up to
twenty-four critical measurements in your engines, three times a second,
with a linearized thermocouple accuracy of better than 0.1 percent or 2°F.
As your built-in flight engineer, the EDM-760 is constantly “red line”
checking: all critical measurements are automatically checked several
times a second, regardless of the current display status. Leaning is
accomplished quickly and automatically using the LeanFind
 procedure.