Operation, Operator controls – SkyTrak 6036 Tier II Operation Manual User Manual
Page 29
Operation
23
Model 6036
Operation
Accelerator Pedal
Pressing down the accelerator pedal (8) increases engine and hydraulic
speed of the vehicle. The pedal is spring-loaded to return to idle speed.
Service Brake Pedal
Pressing down the brake pedal (9) decreases the speed of the vehicle by
applying the service brakes located in the axles. In the event of engine
power loss, the service brake pedal can also be used for braking.
Steering Wheel
Turning the steering wheel (10) to the left or right steers the vehicle in the
corresponding direction. Any one of the steering modes are selectable.
Refer to “Steering Select Switch” on page 25.
Horn Button
Pressing the horn button (11) in the center of the steering wheel sounds the
horn.
Operator Controls
OH1760
8
10
9
11