SkyTrak 6036 Tier II Operation Manual - Manual (Page 141)

General Maintenance
135 Model 6036
3. Attach a remote portable hydraulic pressurizing unit to the parking
brake gauge port (3) on the secondary function manifold (4)
mounted on the inside wall of the frame (5) on the left side next to
the transmission.
4. Turn the key switch to the ON position (with the engine not run-
ning), release the parking brake (park brake switch OFF), and have
the operator seated in the seat.
CAUTION:
DO NOT exceed 575 psi (40 bar) when pressur-
izing the park brake. Applying too much pressure may damage
the brake seals.
4
OA1230
Front
3
5