BNC 1420 - Video Microscope User Manual
Page 24
22
5
RUNNING THE scopePRO SOFTWARE
When you run the scopePRO application, it will automatically connect to
the Model 1420 if it is present on a serial port and turned on. If scopePRO
does not find a Model 1420, the communications settings box will appear
as shown above. Select the correct serial port and press OK.
The scopePRO main window below will appear.
For off-line mode, open the AVI file you want to process off-line. The
Model 1420 does not have to be connected.
For on-line (LIVE) mode, click cancel in the "Open" dialog box for on-
line operation, and click Video>Process live video.
5.1
Video options set-up
If the "video capture hardware" dialog doesn't pop up (it should the first
time) click View>Video options>Input device.