BNC 835-M - Manual (Page 41)

41
Model 835-M Programmer’s Manual V1.1 2011
:PULM:SOURce
[SOURce]:PULM:SOURce INTernal|EXTernal
[SOURce]: PULM:SOURce?
*RST INT
:PULM:STATe [SOURce]:PULM:STATe
ON|OFF|1|0 [SOURce]:PULM:STATe?
This command enables or disables pulse modulation for the selected path.
*RST 0
:PULM:MODE [SOURce]:PULM:MODE
FIXed | LIST [SOURce]:PULM:MODE?
This command sets the modulation mode. With “FIXed”, the normal ON/OFF modulation can be
performed. With LIST, an arbitrary bit pattern can be loaded that will be used to modulate the carrier.
LIST mode is available with pulse train option.
*RST FIXed