Fast & Fluid HP800 - Manual (Page 27)

Troubleshooting HP500 / HP800 V. 3.0
27
5 Troubleshooting
5.1 Contact service
1. Find the type plate on the rear of the machine. See § 3.1.5.
2. Take a note of the model number and the serial number of the
machine.
3. Contact your supplier or manufacturer. See www.fast-
fluid.com .
5.2 Troubleshooting guide
Note
For all error messages on the computer: see the help topic in the software.
Problem Possible cause Possible solution
Main power supply is
present but the machine
does not work. Switch plate is not positioned
correctly. Open and close the switch plate. See §
3.3.
Emergency stop is active. Reset the emergency stop.
A fuse is broken. Contact service. See § 5.1.