Fast & Fluid HP800 - Manual (Page 15)

Operator manual HP500 / HP800 V. 3.0
15
3.2 Operation
3.2.1 General dispensing procedure
For all the software instructions: see the software documentation.
1. Place the can. See § 3.2.2.
2. Move the can table up. See § 3.2.3.
3. Choose the recipe and dispense. See the software
documentation.
4. Move the can table down. See § 3.2.4.
5. Remove the can.
3.2.2 Place the can
1. Place the can (A) at the centre of the mark (B) on the can
table.
WARNING
Only push the emergency stop in the case of a safety emergency.
Make sure that the problem is solved before you reset the emergency stop.
When you reset the emergency stop, the machine restarts automatically. When the machine is
operational, you hear ’beep beep’.
CAUTION
Do not remove the power from the machine. See § 4.4. The machine must stir the colorants
periodically.
Note
The computer switch only turns the computer on and off.
A
B