Fast & Fluid HP800 - Manual (Page 16)

16
Operator manual HP500 / HP800 V. 3.0
3.2.3 Move up the can table
1. Push and hold the upper part of the can table switch (A). The
can table (B) moves up and stops when the can is in front of
the can sensor (C).
2. After the can table stops, release the can table switch.
3.2.4 Move down the can table
1. Push and hold the lower part of the can table switch (A). The
can table (B) moves down.
2. When you can remove the can, release the can table switch.
If you hold the can table switch, the can table moves down to
a halt.
3.3 Maintenance
3.3.1 General cleaning: after every dispensing operation
1. Clean the machine with a cloth and remove all spilled colorant
or other liquid.
A
B
C
A
B
WARNING
Do not put your foot below the can table.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.