Fast & Fluid HP800 - Manual (Page 20)

20
Operator manual HP500 / HP800 V. 3.0
3.3.3 Refilling of a canister
1. In the software, activate the fill canister option.
2. Open the top cover (A).
3. Remove the lid of the canister (B).
4. Add the colorant (C). Do not spill.
CAUTION
Make sure that the colorant level in the canister is correct. If a canister is empty, this can cause an
inaccurate dispensing and/or a recipe fault.
Note
The software checks the level of colorant in each canister. The software on the machine shows
when you need to refill a canister.
1
2
3
B
A
C