Fast & Fluid HP800 - Manual (Page 22)

22
Installation HP500 / HP800 V. 3.0
4.1.3 Open the switch plate
1. Move up the front of the switch plate (A).
2. Push backwards the switch plate.
3. Turn down the switch plate.
4.1.4 Remove the plastic protection on the switch plate
1. Remove the plastic protection (A).
4.1.5 Close the switch plate
1. Turn the switch plate (A) upwards.
2. Move forwards the switch plate.
3. Put the brackets of the switch plate (B) on the brackets (C) of
the sensor.
A
1
2
3
A
1
2
3
B
2x
A
C
C