Fast & Fluid HA600 - Manual (Page 27)

FAST & FLUID MANAGEMENT
HA200 / HA400 / HA600 - V1.71 – 21-07-2004
V MAINTENANCE
page 27
Operation
A - Daily maintenance
Clean the brush tray, refill canisters and run morning program
Remove the brush tray and
empty the container. Clean
the brush with water and
refill the container with
correct fluid (e.g. water).
Fill canisters if level is low
and update levels in
software. Stir colorant
beforehand.
Start software morning
program to purge valves
and clean nozzles. Check
your software manual for
details.
Use only cleaning fluids recommended by your paint supplier.
Wrong materials can result in nozzle blockage and reduced accuracy.
B - Weekly maintenance
Remove spilt paint & colorant and refill canisters
Clean can table and outside
parts with diluted detergent.
Check canister content and
refill if necessary.
Always close canister and machine lid after refilling.
Be aware the machine will not agitate if the top lid is not closed!