Iii installation – Fast & Fluid HA600 User Manual
Page 21
FAST & FLUID MANAGEMENT
HA200 / HA400 / HA600 - V1.71 – 21-07-2004
III
INSTALLATION
page 21
Operation
Step 5 Mount manual punch (optional)
>
>
Remove bottom service
panel. Four mounting nuts
are now visible.
Mount manual punch with
four supplied bolts.
Adjust M4 screws to
center punch position under
nozzle. Place new (slotted)
bottom service panel.
Please ensure punching position of the manual punch is directly under
dispensing nozzle. Adjust M4 screws if necessary.
Step 6 Mount electric punch (optional)
>
>
Three nuts for mounting the
electric punch are located
around the dispense nozzle.
Mount electric punch with
three supplied M6 bolts.
Take care in positioning the
trigger bolt.
Carefully replace can
detection plate and ensure
trigger bolt is correctly
positioned.
Please ensure the trigger bolt on the electric punch correctly triggers
the can detection plate.