Iii installation, A - installing the dispenser – Fast & Fluid HA600 User Manual
Page 19
FAST & FLUID MANAGEMENT
HA200 / HA400 / HA600 - V1.71 – 21-07-2004
III
INSTALLATION
page 19
Operation
A - Installing the dispenser
Step 1 Unpack the machine
>
>
Place the skid near the place
of installation.
Remove the cardboard box.
Remove the plastic foil
around the machine.
Be careful not to damage the body and surfaces of your Harbil with
any tools while unpacking it.
Step 2 Remove loose components
>
>
Unlock the service and back
panel by pushing the two
black handles down
simultaneously.
Remove the panel by pulling
it towards you and
subsequently lifting it.
Remove all packages and
loose components from
within the machine.