Iv operation – Fast & Fluid HA600 User Manual
Page 24
FAST & FLUID MANAGEMENT
HA200 / HA400 / HA600 - V1.71 – 21-07-2004
IV OPERATION
page 24
Operation
Step 4 Fill the brush tray (nozzle cleaning system)
>
>
Remove the brush tray by
opening the door and pulling
down the lever supporting it.
Fill the container with water
or an alternative liquid
proposed by your paint
supplier.
Replace the brush tray in
its original position.
Cleaning fluid must be
refreshed daily!
Use only cleaning fluids recommended by your paint supplier.
Wrong materials can result in nozzle blockage and reduced accuracy.
Step 5 Fill the canisters with colourant
>
>
Unfold the step and open the
top lid by sliding it all the way
back.
Remove the canister lids.
Check your software
manual for filling sequence.
Run software purge
program twice to remove
air from system.