Iv operation, B - dispensing – Fast & Fluid HA600 User Manual
Page 25
FAST & FLUID MANAGEMENT
HA200 / HA400 / HA600 - V1.71 – 21-07-2004
IV OPERATION
page 25
Operation
B - Dispensing
Step 1 Bring can to correct position
>
>
Place the can at the center
of the can table cross hair.
Move the can table upward
by pressing the can table
switch on the keyboard.
The upward movement will
stop automatically.
This is the optimal height
for dispensing.
Step 2 Punch hole in can lid - ELECTRIC (only if fitted with optional electric punch)
>
>
Attention! The punch knife is very sharp! Do not hold can while punching.
After punching the hole will be exactly under the dispensing nozzle.
Please take care not to move the can before dispensing.