Fast & Fluid BT-Tintmaster - Manual (Page 11)

4 Positioning/Installing the machine 9
Before proceeding any further :
Take the installation manual out of the computer packaging and look up the connection
information. This provides a clear description of all computer cables and plugs and the correct
way to connect them.
4.3.3 Installing the computer system (BT with optional monitor stand & mouse/printer stand where
applicable)
•
Position the keyboard (2), the monitor (3) and the computer (4), (and the mouse (5) and label printer
(6) where applicable) as shown in figure 8.
•
Feed the keyboard and monitor cables through the monitor stand into the machine (and the mouse
and label printer cables where applicable). See figure 9. Make sure they are running the right way!
•
Connect the 9-pin serial connector from the powerunit to COM B of the computer.
•
Attach the cover plates to the monitor stand.
•
Bundle any loose pieces of cable with the cable ties supplied.
•
Plug the computer and monitor plugs into the internal socket and switch them on with their on/off
switches
figure 9
6 (option) 3 2
5 (option) 4
figure 8