Fast & Fluid BT-Tintmaster - Manual (Page 10)

4 Positioning/Installing the machine 8
4.3 Mounting the monitor stand and installing the computer system
4.3.1 Mounting the monitor stand (optional on the BT) which can be mounted on the left or right of
the machine.
•
Turn the four fastening bolts with washers and spring washers two turns in the fastening holes in the
base, as shown in figure 6.
•
Drop the brackets of the monitor support over the bolts on the machine and tighten the bolts (spanner
10).
•
Adjust the monitor brackets (see figure 7) to the correct size and tighten them.
•
Remove the cover plates.
4.3.2 Mounting the mouse and printer stand (optional on the BT)
Attach the mouse and printer stand under the monitor stand with the bolts supplied (see figure 6/7).
monitor brackets
fastening bolts cover plate
(2x) mouse /
printer stand monitor /
keyboard arm
figure 7 figure 6